2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 224Get this manual
ELECTRICAL Characteristic STARTER Output Current TRANS Neutral Voltage BRAKE On Input Voltage 14 16 Vdc Voltage on BRAKE input to activate the STARTER output Max reverse leakage current when connected in reverse Absolute maximum reverse voltage before device breakdown Above this resistance is assumed to be an open thermistor, causing the FAN and HOT indicator to activate Thermistor resistance above this value will turn off the fan Thermistor resistance below this value will turn on the fan Thermistor resistance below this value will cause the HOT indicator output to pull low Thermistor resistances above this value will not activate the HOT inidicator output 4.5 -16 Vdc Amp Current capability of the STARTER output MIN TYP MAX UNIT Note