2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 223Get this manual
ELECTRICAL
PDM SPECIFICATIONS
Characteristic Operating Temperature Storage Temperature Parameter 40 to +55 50 to +85 Unit Note
Ambient temperatures at which module should remain within specified limits Ambient temperatures which should have no adverse effects on module operation UNIT Vdc mA Vdc Vdc Vdc ohm Maxtotal DC amperage available from regulator Minvoltage required on RUN for regulator to begin operation Resistance between alternator signal and ground Only on this designated alternator signal Nominal Continuous output current Current level that will cause turn off after delay Min Battery voltage for BAT_PROT to remain on Maxcontinuous current Current above which the output will shut off after 15 25 seconds Current above which the output will shut off after 1.5 2.5 seconds Initial peak short circuit current limit above which the device will current limit then quickly shut down Delay after run switch is turned off Maxcontinuous current Current limit above which device will shut down within thermal shutdown time Current level that will cause turn off and on after delay Note PDM functions will operate over this range Mindraw from battery with key off