2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 214Get this manual
AUXILIARY BRAKE REMOVALINSTALL
Brake Pedal RemovalInstall
1To remove the brake pedal: Remove the footwell Remove the cotter key that secures the brake pedal Remove the washers, bushings, and tension spring 2Reverse the steps for installation, use new cotter key during installation
Rear Brake Master Cylinder RemovalInstall
1If necessary, remove the rear brake line from the master cylinderUse suitable container to catch the brake fluidDispose of brake fluid properly2Remove the two bolts that secure the rear master cylinder to the brake mount plateReplace parts as needed3To install the rear brake master cylinder, mount the master cylinder to the mount plate and torque bolts to ft.lbs(11 Nm)4Reinstall the brake line and torque the banjo bolt to 15 ft.lbs(21 Nm)