2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 154Get this manual
CLUTCHING
DRIVEN CLUTCH MOVEABLE SHEAVEBUSHING REMOVAL
NOTE: Bushings are installed at the factory using Loctite In order to remove the bushing it will be necessary to apply heatA press can be used to remove and install some of the bushingsBe sure to support the sheave or cover as close as possible to the bushing bore when using pressMain Puller Adapter (#8)
Clutch Bushing Removal Tool (#5) 5Working from the top, install Driven Clutch Bushing Removal Tool (#5) (PN 5020631) into the center of clutch sheave with smaller diameter toward bushing to be removedSee illustration at above