2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 152Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 152

CLUTCHING
6Inspect ramp buttons in the moveable sheave and replace if wornNOTE: The ramp buttons are secured by Torx screws (T20)Belt deflection adjustment washers

1Apply and hold downward pressure on the helix, or place driven clutch in the Clutch Compression Tool (PN 8700220)2Remove snap ring retainerNote hole location of spring in helix and sheave

7Remove moveable sheave and note the number of spacer washersOne spacer must remain between the sheaves when adjusting belt deflection

Back to 2009 Polaris Scrambler 500 4x4 2x4 factory service manual