2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 151Get this manual
CLUTCHING
5Turn clutch cover counterclockwise on puller rod until bushing is removed6Remove nut from puller rod and set aside7Remove bushing and bushing removal tool from pullerDiscard bushing
DRIVE CLUTCH COVER BUSHING INSTALLATION
2With the Main Puller Adapter (#8) (PN 5020632) on the puller, insert cover onto puller rod, placing outside of cover toward vise3Install nut on rod and hand tightenTurn puller barrel to apply more tension if needed4Turn clutch cover and barrel together counterclockwise on puller rod until bushing is seated5Remove nut from puller rod and take installation tool and clutch cover off rod