2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 150Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 150

CLUTCHING 6Turn sheave and puller barrel together counterclockwise on puller rod until bushing is removed7Remove nut from puller rod and set aside8Pull bushing removal tool and adapter from puller rodRemove bushing from tool and discard
DRIVE CLUTCH COVER BUSHING REMOVAL
Piston Pin Puller (PN 2870386)

DRIVE CLUTCH MOVEABLE SHEAVEBUSHING INSTALLATION
1Place the Main Puller Adapter (#8) (PN 5020632) onto the puller2Apply Loctite 680 (PN 2870584) to the back side of new bushingPush bushing into center of sheave on tower side by handBushing (PN 3576504) Loctite 680 (PN 2870584)

Back to 2009 Polaris Scrambler 500 4x4 2x4 factory service manual