2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 76Get this manual
ENGINE 1Install new valve seals on valve guides2Apply engine oil to valve guides and seats3Coat valve stem with molybdenum disulfide grease4Install valve carefully with rotating motion to avoid damaging valve seal5Dip valve spring and retainer in clean engine oil and install spring with closely spaced coils toward the cylinder head
18Clean cylinder head, valves, and camshaft oil supply passage (A) thoroughly19If oil passage blind plug was removed, apply Crankcase Sealant (PN 2871557) or equivalent sealer to the threads and install, torquing to ftlbs(11 Nm)CAUTION: Do not allow sealant to enter oil passage20Spray electrical contact cleaner into oil passage and dry using compressed air
CYLINDER HEAD ASSEMBLY
CAUTION: Wear eye protection during assemblyNOTE: Assemble the valves one at time to maintain proper order