2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 38Get this manual
MAINTENANCE NOTE: The sealing surfaces on the drain plug and crankcase should be clean and free of burrs, nicks or scratchesReference Mark on Tank
19Reinstall drain plug20Remove dipstick and fill tank with quarts (1.9 L) of Polaris Premium Synthetic Oil (PN 2871844)21Place gear selector in Park and set parking brakeNOTE: Clamp or pinch off the vent line 2" from the oil tank as shown below in the Oil Pump Priming Procedure for the 500 engine
ILL3 14Place shop towels beneath oil filter (E) Use Oil Filter Wrench (PV-43527), turn filter counterclockwise to remove
22Re-check the oil level on the dipstick and add oil as necessary to bring the level to the upper mark on the dipstick23Dispose of used filter and oil properlyOil Tank Drain Plug Torque: 14 ftlbs(19 Nm) Crankcase Drain Plug Torque: 14 ftlbs(19 Nm) Oil Filter Torque: Turn by hand until filter gasket contacts sealing surface, then turn an additional 12 turn Oil Filter Wrench: (PV-43527) Oil Tank Screen Fitting Torque: See Step 12 Recommended Engine Oil: Polaris Premium All Season Synthetic, 0W-40, (PN 2871281) Ambient Temperature Range: -40 to 120 F