2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 23Get this manual

2009 Polaris Scrambler 500 4x4 2x4 factory service manual, Page 23

MAINTENANCE
TRANSMISSION GEARSHIFT LINKAGE ADJUSTMENT, PRELIMINARY INSPECTION
Linkage rod will rotate 18 -14 turn if rod ends are tightened properly
SHIFT LINKAGE ADJUSTMENT
1Inspect shift linkage tie rod ends, clevis and pivot bushings and replace if worn or damaged2Place gear selector in neutral3Loosen rod end adjuster jam nuts (A) on both ends of linkage rodNOTE: The jam nut with yellow plating is Left Hand thread
Parallel

Gear Selector Arm

Correctly Tightened Jam Nut

Back to 2009 Polaris Scrambler 500 4x4 2x4 factory service manual