2009 Polaris Outlaw 450/525 Service Manual, Page 252Get this manual
8-10 example
Adjusting the position of the throttle sensor
NOTE: the following measurement must be made at component temperature of approx20CThe carburetor must be dismounted to take this measurementThe throttle slide must be in the starting position (1mm open) Connect multimeter (measuring range k) to the blue (+) and black (-) cables on the throttle sensor and measure the total resistance of the throttle sensor (Rges) Multiply the throttle sensor total resistance (Rges) by 0.17 to obtain the variable throttle sensor resistance (Rvar) for the throttle sensor setting