2009 Polaris Outlaw 450/525 Service Manual, Page 232Get this manual
6-7 Mounting the gear sensor and locking lever
Insert the contact pins and contact spring in the shift drum
Replace the O-ring on the gear sensor Degrease the screw threads (M5x16) and apply Loctite 243Screw on the gear sensor and retaining bracket and tighten to Nm Run in the cable for the gear sensor Degrease the screw thread and apply Loctite 243Screw on the locking lever and spring and tighten to Nm Degrease the screw thread and apply Loctite 243Screw on the bracket for the vent hose and tighten to 10 Nm Mount the shift lever and turn the main shaft while you shift through the gearsRemove the shift lever again