2009 Polaris Outlaw 450/525 Service Manual, Page 194Get this manual
4-5 Removing the pulse generator and extracting the flywheel
! NEVER CAUTION !
STRIKE THE FLYWHEEL WITH HAMMER OR OTHER TOOLTHIS COULD SEPARATE THE MAGNETS FROM THE FLYWHEEL AND DAMAGE THE CRANKSHAFTHOLD WITH THE MAGNETO EXTRACTOR TO PREVENT THE ENGINE LOCKING SCREW FROM BENDING
Loosen the cable on the pulse generator Remove the screws and take off the pulse generator Mount the flywheel puller PA-48680 and extract the flywheelUse the protection cover when extracting Remove the woodruff key from the crankshaft
Removing the clutch drive and outer clutch hub
Pull the driver from the main shaftIf necessary, insert the protection cover in the main shaft and use puller