2009 Polaris Outlaw 450/525 Service Manual, Page 166Get this manual
ELECTRICAL Cranking Output Tests
The following tests will measure the amount of output directly from each componentTest output from the CDI box and pulser coil and compare to the specification tableThe following measurements are obtained when cranking the engine with the electric starter and with the spark plug installedThe starter system must be in good condition and the battery fully charged200 Watt Stroke DCCDI Ignition Connect Meter Wires To: Red and Green WhiteBlue and Ground Taken With Standard Volt Ohm Meter .13.14 VAC 200 VDC