2009 Polaris Outlaw 450/525 Service Manual, Page 163Get this manual

2009 Polaris Outlaw 450/525 Service Manual, Page 163

ELECTRICAL Brake Light Switch Tests
Foot Brake Switch 1Disconnect wire harness from switch and connect an ohmmeter across switch contactsThe circuit should have an open line or infinity reading23Connect an ohmmeter across switch contactsThe circuit should have an open line or infinity readingApply the clutch lever and check for continuity between switch contactsReplace switch if there is no continuity or if continuity is greater than .5 ohms when the clutch lever is applied
Tether Switch Test (Accessory Option)
1Disconnect wire harness from switch and connect an ohmmeter across switch contactsThe circuit should have an open line or infinity readingApply foot brake and check for continuity between switch contactsReplace switch if there is no continuity or if continuity is greater than .5 ohms when the brake is applied with slight pressure