2009 Polaris Outlaw 450/525 Service Manual, Page 140Get this manual

2009 Polaris Outlaw 450/525 Service Manual, Page 140

BRAKES Brake Fluid Replacement and Bleeding Procedure
NOTE: When bleeding the brakes or replacing the fluid always start with the caliper farthest from the master cylinderNOTE: Do not move brake lever when reservoir fluid level is low
Always wear safety glasses during these procedures
5Brake fluid will damage finished surfacesDo not allow brake fluid to come in contact with finished surfacesNOTE: This procedure should be used to change fluid or bleed brakes during regular maintenanceFront Brake Caliper Bleeding 12Clean reservoir cover thoroughlyRemove screws, cover, and diaphragm from master cylinder reservoir6
Add brake fluid to the upper level mark on reservoir