2009 Polaris Outlaw 450/525 Service Manual, Page 122Get this manual
BODYSTEERINGSUSPENSION 12Fill shock body to the bottom of the bearing threads with oil13Using the IFP Depth Setting Tool, slowly pull the IFP up to the mid point of the reservoirThen push it down to the bottom again (Fig14)Be careful not to pull the IFP out completelyAlso, be careful that the oil level in the shock body does not disappear below the bottom of the body and into the reservoirIf the oil does recede completely from the body, you must remove the IFP and go back to step of reassemblyFigure 14 20Add oil to the body tube until the surface of the oil is to the top of the threads inside the body tube21Pull the damping piston up until it is just below the surface of the oilAdd more oil if necessary22Hold the shaft eyelet with one handWith other hand, slide the bearing assembly down the shaft until contact with the body is madeOil will overflow from around the bearing (Figure 16)Figure 16