2009 Polaris Outlaw 450/525 Service Manual, Page 88Get this manual

2009 Polaris Outlaw 450/525 Service Manual, Page 88

BODYSTEERINGSUSPENSION 15Using suitable holding fixture, press or tap the carrier bearings out the opposite end of each housingNOTE: Do not reuse the bearings if removed3Using Special Tool PN PA-48282, press the rear hub assembly togetherVerify o-ring is seated properly during reassembly
Bearing

Assembly
1Using suitable holding fixture, press or tap the carrier bearings into the housing4

Back to 2009 Polaris Outlaw 450/525 Service Manual