2009 Polaris Outlaw 450/525 Service Manual, Page 86Get this manual
BODYSTEERINGSUSPENSION Housing DisassemblyService
123Place housing in suitable holding fixtureRemove both boot clamps from their locationsUsing flat blade screwdriver, carefully pry the retaining ring from each boot6Using flat blade screwdriver, carefully pry the retaining rings from both CV ball cagesRemove the CV ball cage retaining rings from the housingRemove the retaining rings from both inner boots of the rear housingRemove the inner CV joints and shaft assemblies from the carrier housingRemove both inner boots by pulling outward on bootA blunt prying tool may be required to break the sealing area