2009 Polaris Outlaw 450/525 Service Manual, Page 71Get this manual
BODYSTEERINGSUSPENSION Side Panels
123Refer to the "Front Cab" procedure to remove the front cab and side panels as an assemblySlide each side panel forward to disengage the tabs from the front cab and remove themReverse the removal steps to reinstall the side panel and refer to "Front Cab" procedure to reinstall the front cab 6Remove both seat grommets (B) from the rear cab and completely remove the rear cabB
Rear Cab
1234Remove the seatRemove the (2) T278mm Hex-head screws from the rear portion of the side panelsRemove the (2) T278mm Hex-head screws retaining the rear cab to the heel pocketsRemove the (2) T278mm Hex-head screws retaining the rear cab to the frame7Reverse the removal steps to reinstall the rear cab Lubricate the rubber grommets to aid assembly Route tail light harness through rear cab upon assemblyA