2009 Polaris Outlaw 450/525 Service Manual, Page 70Get this manual
BODYSTEERINGSUSPENSION BODY COMPONENT REMOVAL
12The seat latch is located underneath the tail lightRemove the seat by pulling the seat latch outward and lifting up on the rear of the seatOnce the rear of the seat is loose, disengage the front by pulling the seat back towards the rear of the ATV
Front Cab
12Remove the seat and front coverRemove the (4) T278mm Hex-head screws and push rivet retaining the front cabside panels on each sideInstall the seat by engaging the front portion first, then pulling the seat latch out while setting the seat down and into placeLift up on the seat to verify it is latched downRemove the retaining nut and wave washers from the key switch and remove the switch from the front cabKey Switch Location Disconnect HERE