2009-2010 Polaris RZR Factory Service Manual, Page 303Get this manual
BRAKES MASTER CYLINDER
Removal
1Locate the master cylinder above the LH front tire in the wheel well areaNOTE: Make note of front and rear brake line locations to master cylinder4Loosen the brake line banjo bolts (C) and allow fluid to drainRemove the two mounting fasteners (D) that secure the master cylinder to the frame
CAUTION
NOTE: Dispose of fluid properlyDo not re-use5
Installation
12Reverse Steps 1-5 for master cylinder installationRefer to the torque specifications in the illustrationAfter installing the foot brake check pedal freeplayPedal freeplay should not exceed .090" (2.286 mm)
BRAKE PEDAL LEVER