2009-2010 Polaris RZR Factory Service Manual, Page 245Get this manual
FINAL DRIVE 11Remove the roll cage assembly and rollers from the clutch housingUse shop towel to cover the housing in order to retain all the rollersNOTE: Rollers are spring loadedTake care not to allow them to fall out or lose them upon removal of the roll cage12Thoroughly clean all parts and inspect the rollers (A) for nicks and scratchesThe rollers must slide up and down and in and out freely within the roll cage sliding surfaces and H-springs15Inspect both output hub assembliesInspect the bearings and replace if needed
Gearcase AssemblyInspection