2009-2010 Polaris RZR Factory Service Manual, Page 110Get this manual
ENGINE Install enginetransmissionrear gearcase mounting hardware and torque to specification
Engine Break-In Period
The break-in period consists of the first 25 hours of operation, or the time it takes to use 14 gallons (53 liters) of fuelCareful treatment of new engine and drive components will result in more efficient performance and longer life for these components
CAUTION
12345Front Isolator Mounts
Fill fuel tank with unleaded or leaded fuel which has minimum pump octane number of 87= (R+ M)2Check oil level indicated on dipstickAdd oil if necessary (Refer to Chapter 2, "Engine Oil Level" )Drive slowly at first to gradually bring engine up to operating temperatureVary throttle positionsDo not operate at sustained idle or sustained high speedPerform regular checks on fluid levels, controls and all important bolt torquesPull only light loads during initial break-inChange oil and oil filter after break-in period at 25 hours