2009-2010 Polaris RZR Factory Service Manual, Page 107Get this manual
ENGINE 3Lubricate threads and top of washers underside of bolt head with engine oilInstall head bolts (C) and torque to specification5Lubricate rockers (E) with engine oil67Verify pushrods are engaged in liftersInstall rockersBe sure that tab of fulcrum (F) is seated in head stand-offTorque bolts to specificationInitial setting: 35 ftlbs(47.5 5.5 Nm) Allow to set for minute, then turn additional 90 (14 turn) Torque Bolts In Sequence 4Lubricate push rods (D) and install into lifters22 ftlbs(30 Nm)