2009-2010 Polaris RZR Factory Service Manual, Page 75Get this manual
ENGINE Rocker Arms
12Remove the valve coverMark or tag rocker arms in order of disassembly to keep them in order for reassembly5If the push rod (A) is visibly bent, it should be replacedCylinder Head Removal
NOTE: The cargo box assembly and the upper frame bolt-in brace must be removed to allow enough clearance to remove all the cylinder head boltsRefer to Chapter for removal procedures12Loosen the six cylinder head bolts evenly 18 turn each in criss-cross pattern until looseRemove bolts (A) and tap cylinder head (B) lightly with soft face hammer until looseCAUTION: Tap only in reinforced areas or on thick parts of cylinder head casting to avoid damaging the head or cylinderRemove cylinder head (B) and head gasket (C) from the cylinder (D)Inspect the wear pad at the valve end of the rocker arm for indications of scuffing or abnormal wearIf the pad is grooved, replace the rocker arm