2009-2010 Polaris RZR Factory Service Manual, Page 68Get this manual
ENGINE 12Elevate the rear of the vehicle off the ground using suitable ATV lift and remove both rear wheels13Remove all exhaust components from vehicle and engine14Loosen the hose clamp attaching the outlet duct to the PVT coverLeave the duct attached to the upper frame support18Remove the (6) fasteners retaining the upper bolt-in frame brace and remove it from the vehicle with the ignition coil and PVT duct attached
19Remove the upper nut and grommet from the stabilizer bar linkage on both sides of the vehicle15Remove the (8) screws that retain the PVT cover and remove cover16Remove the high tension leads from the spark plugs and disconnect the ignition coil harness