2009-2010 Polaris RZR Factory Service Manual, Page 29Get this manual
MAINTENANCE 11Lift up on the floor and remove the panduit strap retaining the throttle cable and brake line to the frame12Remove the cable end and retainer from the throttle foot pedal13Remove the (2) screws retaining the throttle cable bracket to the frame support20Route the cable through the retainer at the bottom of the frame in the floor console opening
21Continue to route the cable towards the rear of the vehicle following the brake line routing22Use the (2) cable ties to retain the throttle cable to the brake line14Remove the front upper cable clamp from the vertical frame tubeNOTE: Be sure to route the throttle cable inside the boss on the rear portion of the floor