2008 Polaris Sportsman 700/800/700 X2 EFI Service Manual, Page 335Get this manual
ELECTRICAL 2Pull the harness assembly out from the headlight assembly
Low Beam Headlight Adjustment
1The low beam can be adjusted slightly upward or downward
Loosen Screw
3Remove the lamp and replace with new headlampNOTE: Do not touch the new lamp with bare fingersHold the plastic part (1) of the lampOil from your skin leaves residue, causing hot spot that will shorten the life of the lamp
Loosen the phillips screw located at the rear of the headlampTilt the headlamp upward or downwardTighten the screw
Headlamp Switch Test
4Install the harness assembly into the headlight assemblyTurn the headlight harness clockwise to secure the headlamp into place123Remove the headlight pod coverSet meter to DC Volts and probe the headlamp plug wires (Brown and Yellow) at back of connector for 12 VoltsTurn ignition and headlight onIf there is no power, continue with checks to the harness and fusesBrown Yellow