2008 Polaris Sportsman 700/800/700 X2 EFI Service Manual, Page 274Get this manual
X2Touring Transmission 10With all of the components in the correct positions install the output gear assembly screwsApply LoctiteTM 262 (PN 2871952) to the threads of the screwsTorque the screws to specificationNOTE: If the transmission is in locked in Park, place the transmission in Neutral12Install the rear drive differential and drive chain, following these precautions: The case half rear output seal should be removed prior to installation of the differential, as seal damage can occur with seal installed due to the angle of entry Install the differential sliding geardog onto the shift fork arms at the same time the silent chain is installed The differential gear bearing may be lightly tapped into placeThe output seal can be installed once the assembly is in place