2008 Polaris Sportsman 700/800/700 X2 EFI Service Manual, Page 236Get this manual

2008 Polaris Sportsman 700/800/700 X2 EFI Service Manual, Page 236

FINAL DRIVE Be sure joints are thoroughly clean and that the proper amount and type of grease is used to refill when joint boots are replaced and when joints are cleanedRefer to text for grease capacity of CV joints and CV joint boots
REAR GEARCASE
Removal
123456Place ATV on level surface and place transmission in PARK'Loosen both rear wheel nutsLoosen both rear center hub nutsLift and safely support rear of ATV so that the rear wheels are off the groundRemove the roll pin from the rear transmission yoke and pull vent line off the gearcaseRemove both rear wheels and center hub nuts