2008 Polaris Sportsman 700/800/700 X2 EFI Service Manual, Page 232Get this manual
FINAL DRIVE =T
Lower Control Arm Bolt Torque: 37 ftlbs(50 Nm) 4Lift bearing carrier until top aligns with upper control armInstall and torque upper control arm bolt and torque to specificationPull drive shaft outward and install hub onto driveshaft splinesInstall cone washers with domed side facing outwardInstall retainer nut, wheel and wheel nutsRemove jackstand and torque axle nut and wheel nuts to specification
REAR DRIVE (CV) SHAFT
Removal
12Remove rear hub, see "REAR HUB REMOVAL"Remove upper carrier boltTip hub outward and remove shaft from carrier