2008 Polaris Sportsman 700/800/700 X2 EFI Service Manual, Page 195Get this manual

2008 Polaris Sportsman 700/800/700 X2 EFI Service Manual, Page 195

CLUTCH SYSTEM 6Install left hand nut (C) and spacer onto puller rod and tighten by handTurn puller barrel for further tension if needed7Turn clutch sheave counterclockwise until bushing is removed and sheave comes free8Remove nut (C) (left hand thread) from puller rod and set aside9Remove adapters from puller10Remove bushing and removal tool from adaptersDiscard bushing
EBS DRIVEN CLUTCH REASSEMBLY
1Press new bearing onto the output shaft using press
Driven Clutch Bushing Installation

Back to 2008 Polaris Sportsman 700/800/700 X2 EFI Service Manual