2008 Polaris Sportsman 700/800/700 X2 EFI Service Manual, Page 145Get this manual
BODYSTEERINGSUSPENSION 3Place spacers on frame3Remove the two screws (B) that secure the front cab to the frame in the fuel tank mount area
Install rear rack onto rear frame and cabInstall the two bolts (B) and six (A) T-27 screwsTorque the bolts (A) to 18 in.lbs(2 Nm) and six T-27 screws to 36 in.lbs(4 Nm)Refer to the illustration for torque values
Remove the side panels (D), refer to the "SIDE PANEL REMOVAL" sectionRemove the plastic inserts (E) that secure the front of the foot wells to the front cab
Front CabFender RemovalInstallation
1Follow the "FRONT RACKBUMPER REMOVAL" section to begin removal of the front cab, rack, and bumperRemove the plastic inserts (A) that secure the front cab to the upper strut supportE