2008 Polaris Sportsman 700/800/700 X2 EFI Service Manual, Page 107Get this manual
ENGINE Cylinder Head Reassembly
NOTE: Before reassembly, clean the bolts and bolt holes with Primer (PN 2870585) to remove any debrisThis will ensure proper sealing when installing bolts1Install the head gasket (A) on the cylinder (B)4Lubricate push rods (D) and install into lifters5Lubricate rockers (E) with engine oil
Install cylinder head on cylinderLubricate threads and top of washers underside of bolt head with engine oilInstall head bolts (C) and torque to specification67Verify pushrods are engaged in liftersInstall rockersBe sure that tab of fulcrum (F) is seated in head stand-offTorque bolts to specification