2008 Polaris Sportsman 700/800/700 X2 EFI Service Manual, Page 68Get this manual
ENGINE Engine Removal (Typical) WARNING
Always wear safety glasses and proper shop clothing when performing the procedures in this manualFailing to do so may lead to possible injury or death1234Clean work areaThoroughly clean ATV engine and chassisDisconnect battery (-) negative cableRemove the following parts as required: Seat Left and right side covers (refer to Chapter 5) Fuel tank covers Fuel tank (refer to Chapter 4) Springs from exhaust pipe and remove pipe5678Drain coolant and engine oilRemove air pre-cleaner and ductRemove airboxDisconnect the throttle body sensor (C) and T-BAP sensor (D)Remove throttle body (A)Insert shop towel into the engine intake to prevent dirt from entering the ports10Disconnect spark plug high tension leads11Remove the crank position sensor (E) located on the mag cover9Relieve the fuel pressure in the fuel rail (refer to Chapter 4, FUEL INJECTION") for proper procedureCarefully remove the fuel rail (B) and injectors