2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 362Get this manual

2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 362

ELECTRICAL FUEL SENDER
Testing
12345Drain the fuel tank and remove it from the ATVSet the fuel tank on flat surfaceHook up an ohm meter to the fuel sender harness wire (B) and wire (C)With the sender float in the empty position, the meter should read ohmsSlowly tilt invert the tank so that gravity moves the sender float to the full position, the meter should now read 90 ohmsFuel Sender

ACCESSORY POWER
Wire Connections

Back to 2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual