2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 357Get this manual
ELECTRICAL 3Unplug head lamp harness (C)8Reverse the steps to install the new housing and reassemble the podRemove O-Ring (D) from headlight pivot pins(Both Sides)
5 18" (13 cm) NOTE: he distance from the head lamp parting line to the end of the adjustment knob stop is 18", (13 cm)See illustrationAdjust the headlight aim by turning the adjusting knob
High Beam Headlight Adjustment
The headlight beam can be adjusted to any position desired by turning the adjusting knob located on the bottom right side of the headlight podRaise HeadlightTurn knob counter- counterclockwise Lower HeadlightTurn knob clockwise 5Pull the headlight housing up to release from the locking tabs