2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 269Get this manual

2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 269

FINAL DRIVE =T
Lower Control Arm Bolt Torque: 37 ftlbs(50 Nm) 4Lift bearing carrier until top aligns with upper control armInstall and torque upper control arm bolt and torque to specificationPull drive shaft outward and install hub onto driveshaft splinesInstall cone washers with domed side facing outwardInstall retainer nut, wheel and wheel nutsRemove jackstand and torque axle nut and wheel nuts to specification
REAR DRIVE (CV) SHAFT SERVICE
Removal

Back to 2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual