2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 251Get this manual

2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 251

FINAL DRIVE ReassemblyInspection
1Replace all O-rings, seals, and worn components5Install the LH output hub (A) into the gearcase housingThe output hub should spin freely
Press the pinion shaft seal into the pinion cover, until the seal is flush with the sealing surfaceInspect bearings on output and pinion shaftsTo replace, press new bearing on to shaftInstall the RH output hub (B) into the output coverThe output hub should spin freely

Back to 2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual