2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 241Get this manual

2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 241

FINAL DRIVE PROP SHAFTFRONT
Removal and Installation
1Using Roll Pin Removal Tool (PN 2872608), remove the roll pin from prop shaft at rear of housing (front only) or transmission output shaft (rear only)Slide prop shaft back and away from housing, then pull sharply forward to remove from transmission shaftFor installation, reverse the removal procedureUse antiseize compound on the splines1

Back to 2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual