2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 229Get this manual
CLUTCH SYSTEM 3Insert Adapter Reducer (#9) (PN 5010279) onto the puller, sliding it inside the main adapter678Install sheave onto pullerInstall nut onto puller rod and tighten by handTurn puller barrel for further tension if neededTurn clutch sheave counterclockwise until bushing is removedRepeat Stepsfor other bushingUsing an appropriate heat gun, apply heat directly on bushing until tiny smoke tailings appear
CAUTION
Clutch components will be hot! In order to avoid serious burns, wear heat resistant insulated gloves for the rest of the removal process
9Remove nut from puller rod and set aside10Remove adapters from puller11Remove bushing and removal tool from adaptersDiscard bushing