2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 213Get this manual
CLUTCH SYSTEM Cover Bushing Removal 1Install main adapter (Item 8) on pullerRemoval Tool (3) Nut (C)
One-Way Clutch Inspection (Drive Clutch)
1Rotate one-way clutch clockwise (as viewed from the cover plate side)The clutch should rotate on the shaft with only slight amount of dragVerify there is no binding or rough spotsWhen rotated counterclockwise, the clutch should lock to the shaft without slippingIf problems are noted in either direction, continue with disassembly
Adapter Reducer (9) Piston Pin Pulle Main Adapter (8)
2345678