2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 94Get this manual

2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 94

ENGINE 9Measure pump end clearance using feeler gauge and straight edge
Oil Pump Assembly
1Clean and dry all parts thoroughlyApply clean engine oil to all partsDo not use gasket sealer on the pump body mating surfaces or oil passages will become pluggedInstall pump shaft and scavenge rotor drive pinInstall outer scavenge rotor, inner scavenge rotor, and scavenge casingInstall outer feed rotor and inner feed rotor drive pinInstall inner feed rotor and feed chamber cover with screwTighten screw securelyInstall screen on pump bodyInstall oil pump on crankcase and torque bolts to ftlbs(8 Nm)Oil Pump Attaching Bolt Torque: ftlbs(8 Nm)

2345678

Back to 2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual