2008 Polaris Sportsman 500 EFI/X2/Touring/500 H.O. Service Manual, Page 55Get this manual
MAINTENANCE Lubricate Inspect all cables and lubricate with Polaris Cable LubricantFollow lubrication guidelines in the maintenance section of the service or owner's manual to completely grease and lubricate the entire vehicle with Polaris Premium All Season GreaseStorage Tips Battery Storage Remove the battery from the vehicle and ensure that it's fully charged before placing it in storageSee Chapter 10 for instructionsEngine Anti-Freeze Test engine coolant strength and change if necessaryCoolant should be replaced every two yearsStorage AreaCovers Set the tire pressure and safely support the ATV with the tires 12" off the groundBe sure the storage area is well ventilated, and cover the machine with genuine Polaris ATV coverNOTE: Do not use plastic or coated materialsThey do not allow enough ventilation to prevent condensation, and may promote corrosion and oxidationTransporting the ATV Follow these procedures when transporting the vehicle12345Turn off the engine and remove the key to prevent loss during transportingAlways place the transmission in park and lock the parking brakeTurn the fuel valve offBe sure the fuel cap, oil cap and seat are installed correctlyAlways tie the frame of the ATV to the transporting unit securely using suitable straps or rope