2008 Polaris Ranger RZR Service Manual, Page 287Get this manual

2008 Polaris Ranger RZR Service Manual, Page 287

ELECTRICAL ALL WHEEL DRIVE COIL
Operation Overview
When the AWD switch is "ON", 12 VDC power is present at the hub coil If the criteria is met, the instrument cluster provides ground path at pin #16When this occurs the AWD icon should display in the instrument cluster The AWD system must be grounded to operateA HIGH LOW NEU REV PARK X

GEAR POSITION INDICATOR SWITCH
Test Diagram Continuity Table

Diagnosing System Failures
Verify the AWD switch is functional and that minimum of 11 volts is present at the hub coil Verify the AWD hub coil is functionalTest the AWD hub coil using an ohm meterSee specifications below:

Back to 2008 Polaris Ranger RZR Service Manual