2008 Polaris Ranger RZR Service Manual, Page 214Get this manual
FINAL DRIVE 5Carefully install the rollers into the roll cage assembly while installing the assembly into the clutch housing9Install the RH output hub into the clutch housing assemblyClutch Housing RH Hub
IMPORTANT: To ensure gearcase is assembled properly, assemble the gearcase components starting with the cover plate and build upward6Install new O-ring on the cover plate assembly
10While holding the hub in the clutch housing, flip the clutch housing over and install the armature plateEngage the tabs into the slots in the roll cage assemblyNOTE: Be sure armature plate tabs are placed into the slots on roll cage (see reference photo)
NOTE: Be sure the square O-ring is placed flat on the cover surfaceIf the O-ring is twisted fluid leakage may occur7Carefully install the LH output hub assembly with the thrust bearing into the cover plateTake care not to damage the new cover plate seal while installing the output hub