2008 Polaris Ranger RZR Service Manual, Page 206Get this manual
FINAL DRIVE PROPSHAFT SERVICE
RemovalInstallation
1Locate the propshaft roll pin and use the Roll Pin Removal Tool (PN 2872608), to remove the roll pin6Remove the fasteners retaining the plastic skid plate and remove the skid plate from the vehicle
NOTE: Front wheel can be removed to gain better access to the propshaft roll pin
Cupped Washers Screws 78Remove the propshaft from the vehicleReverse removal steps to reinstall propshaftUse NEW Roll Pin (Spring Pin) upon reassembly
Roll Pin Removal Tool (PN 2872608)
23Remove the gear selector cap and remove the retaining screwRemove the push rivets and Torx screws retaining center console to access the propshaftCap Push Rivets Screw