2008 Polaris Ranger RZR Service Manual, Page 192Get this manual
CLUTCHING 6Install the roller pin into the sheave assembly on both sidesThe flat side of the roller pin faces downward when the shaft side is laying flat on the bench9Install the spring over the shaft
Flat Side Down
7Install the spring pins (C) to secure the roller pinsInstall until flush with sheave surface
10Install the clutch rollers (D) onto each side of the outside spiderInstall the washers (E) and E-clips (F) to secure the rollersThe rollers should spin freely11Install the spider dampener (G) inside the outer spider and install the inside spider plate (H)Outer Spider E