2008 Polaris Ranger RZR Service Manual, Page 188Get this manual
CLUTCHING 6Remove the inside spider plate (D) and spider dampener (E)Inspect the spider dampener (E) for wear and replace if needed9Press out the spring pins (K) in the inner sheave
10Pull out the clutch roller pins (L) and rollers (M)7Remove the E-clips (F), washers (G), and the clutch rollers (H)Inspect the rollers for wear; replace if worn11Press the shaft and bearing out of the outer sheave using pressRemove the clutch assembly from the holding toolRemove the large outer retaining ring (I) and the inner retaining ring (J)